Polytranspar Fiberglass Lay-Up Resin
This iophthalic (slightly flexible) polyester laminating resin withstands temperature variations better than other polyester resins on the market. It may be used in all seasons for a variety of projects around the wildlife art studio. It is ideal for casting reproduction fish and fish heads, death masks, mold making, standard fiberglass lay-up operations, habitat and exhibit construction, structural reinforcement, waterproofing, or anywhere a good polyester resin is needed. Note: Although the normal shelf life for lay-up resin averages six months, the shelf life will be reduced if stored near a heat source. Includes MEKP catalyst, dyed red for greater visibility during mixing. To use, mix 1%-2% catalyst with the resin and stir thoroughly. The resin will begin to gel in 8 to 30 minutes depending upon the amount of catalyst and the ambient temperature. (UPS hazardous materials surcharge when shipping over one gallon.)

Code          Size           Catalyst     Price
LR101-128     Gallon Kit       2 oz.      37.95
LR101-32      Quart Kit      1/2 oz.      14.95

---

Extra Catalyst
MEKP (methyl ethyl ketone peroxide) catalyst for Polytranspar Lay-Up Resin. Dyed red for greater visibility during mixing. Add 1/2%-2% catalyst to resin depending on gel time desired. Cannot be shipped by air.

Code        Size     Price
RC101-2     2 oz.     4.95

---

White Gelcoat
Perfect for making fiberglass molds, death masks, study casts, reproduction fish, etc. This is the first coat on a fiberglass casting -- the one which captures all the detail. Shaded to a clean, white color for easy visibility to ensure complete coverage. Note: Although the normal shelf life of Gelcoat should average six months, its shelf life will be reduced if it is stored near a heat source. Includes 1/2 oz. catalyst. (UPS hazardous materials surcharge when shipping over one gallon.)

Code         Size         Catalyst     Price
GC32      1 Quart Kit      1/2 oz.     24.95
GC128     1 Gallon Kit       2 oz.     62.95

---

Disposable Plastic Pipettes
An easy no-mess method for adding MEKP catalysts one drop at a time. Simply squeeze and release the bulb to draw liquid into the pipette, where it can be dispensed with pinpoint control.

Code     Quantity    Price
PP01      Single       .25

PP12      Dozen       1.98