Zap-A-Gap Cyanoacrylate Superglues

Zap-A-Gap CA+
Taxidermists everywhere are discovering the many uses of Zap-A-Gap. This excellent all-purpose instant-bonding glue has a thicker consistency to readily fill gaps as it bonds permanently. The unique non-clogging tip design allows hundreds of uses from each individual bottle, and makes it easy to achieve pinpoint control over each drop applied. It is perfect for artificial duck heads, open-mouth work, or closing small holes. Zap-a-Gap CA+ allows 7 to 10 seconds for positioning, and a 20 second cure time. Bonds anything to anything -- even oily surfaces! Now available in two convenient sizes.

Code         Item Description         Price
ZAP1     1/2 fl. oz. Zap-A-Gap CA+     4.89
ZAP2     1 fl. oz. Zap-A-Gap CA+       7.79

---



Zap Gel
The thickest "superglue" formula is now available from the makers of Zap-A-Gap. Nearly the consistency of toothpaste, Zap Gel will not run on vertical or inverted surfaces, yet has all the instant bonding properties of other Zap products.

Code      Item Description      Price
ZAP3     20 gr. Tube Zap Gel     8.59

---



Zap CA Super Thin Formula
Clear cyanoacrylate adhesive which bonds in seconds. Zap CA is superthin with a penetrating action which makes it ideal for gluing down lifted scales on fish mounts. Bonds skin instantly so it is perfect for many taxidermy procedures. Use it to fill small holes in hides instead of stitching. You can glue bird and small mammal toes to bases instead of pinning. Instantly glue skin to artificial bills, noses, and jaw sets. Also used by carvers to penetrate wood and strengthen thinly carved fins and feathers. It also can be used to strengthen figerglass and cloth. It sets very rapidly -- simply apply, hold the glued item in place for a few seconds, and it will be permanently bonded. Just be careful not to get it on your fingers, as it will also bond your skin instantly.

Code     Item Description    Price
ZAP8     1 fl. oz. Zap CA     7.89

---



Poly-Zap
New Poly-Zap high performance formula cyanoacrylate adhesive is specially formulated for use on space-age plastics such as Lexan, delron, nylon, polycarbonate and rubber. Will not fog clear plastics so it is ideal for exhibit cases and water scenes. Dries clear, strong, and flexible.

Code        Item Description      Price
ZAP4      1/2 fl. oz. Poly-Zap     5.99

---



Z-Poxy 5-Minute Epoxy Formula
Here's an economical alternative to expensive epoxy syringes which only contain an ounce or less of material. Z-Poxy contains a full 4 ounces of quick setting epoxy adhesive. Bonds, seals and repairs steel, glass, iron, aluminum, brass, bronze, wood, porcelain, ceramics, most plastics, and urethane foam. Dries clear for use in Artificial Water splash scenes. Great for altering or reattaching parts of small mannikins, fish taxidermy, snake taxidermy, habitat construction, and many other uses. Simply dispense equal amounts of resin and hardener, mix together thoroughly and apply. In just five minutes, the epoxy will harden and you'll have a permanent chemical bond. (S.W. 6 oz.)

Code               Item Description               Price
ZAP7      4 fl. oz. Z-Poxy 5-Minute Epoxy Kit     11.49

---



Z-7 Debonder
Z-7 Debonder from ZAP softens and removes cured cyanoacrylates (all brands of Super Glue). Use it to clean hardened glue from your fingers, tools, and workbench. If you can get to the glue, you can even repair misaligned skins. Flammable.

Code        Item Description       Price
ZAP6     1 fl. oz. Z-7 Debonder     4.79

---

Cyberbond Cyanoacrylate Superglues
Cyberbond Cyanoacrylates are made from the purest ingredients and tested against the toughest standards, so you are assured of pure holding power. The Cyberbond family of "super-glues" offer many different formulataions for your specific requirements. Cyberbond is a supplier to the worldwide industrial marketplace. WASCO is now bringing you a select group of Cyberbond"s top performers for use in your wildlife art studios. We know these adhesives will meet your standards of excellence.

Cyberbond Thin
Cyberbond Thin is specially formulated specifically for balsa wood, and tight fitting joints. This low viscosity, penetrating adhesive, is the fastest super glue on the market today. It sets in only one second! Cyberbond Thin has a special ingredient which accelerates the curing reaction when introduced to the fibers of wood. The superior wicking capabilities make it ideal for fish carving and strengthening fragile wooden fins. For all areas where you would normally use a thin super glue, give Cyberbond Thin a try. Available in two convenient and economical sizes.

Code              Item Description              Price
CB110     1 oz. Bottle Cyberbond Thin Small      6.95
CB120     2 oz. Bottle Cyberbond Thin Small     10.95

---



Cyberbond Medium
Cyberbond Medium is a specially formulated medium viscosity cyanoacrylate adhesive which works great for plastics, hardwood and poor-fitting joints. Its gap-filling capabilities are ideal for many used in the taxidermy studio. It also bonds well with all substrates, ABS plastics, Delryn, polycarbonate, Nylon and all of the most popular industrial plastics. Use Cyberbond Medium wherever you would normally use a medium viscosity super glue. Available in two convenient and economical sizes.

Code               Item Description               Price
CB210     1 oz. Bottle Cyberbond Medium Small      6.95

CB220     2 oz. Bottle Cyberbond Medium Large     10.95

---



Cyberbond Thick
Cyberbond Thick has the maximum gap-filling characteristics so many taxidermists are looking for. This is an excellent product for tough to bond materials. This adhesive was formulated with hobbyists in mind. In some situations, water-thin super glues tend to run and cause a mess, sticking fingers and splashing, while gap-filling glues take too long to set up. For these situations there is Cyberbond Thick. This new super glue is thick enough to apply with ease and fast enough to speed your taxidermy projects. Available in two convenient sizes.

Code               Item Description              Price
CB310     1 oz. Bottle Cyberbond Thick Small      6.95
CB320     2 oz. Bottle Cyberbond Thick Small     10.95

---



Cyberbond Superglue Remover
For the first time ever an industrial strength super glue remover is introduced to the taxidermy industry. Where other companies have tried to introduce a remover that is based with acetone and does not work, Cyberbond is pleased to introduce a remover, which is the highest strength in both consumer and industrial markets. Use our remover on all applications where you have unwanted super glue and we guarantee the results. Cyberbond Super Glue Remover is your safety net when using any super glue. Flammable product.

Code                  Item Description                 Price
CB602     2 oz. Bottle Cyberbond Superglue Remover     10.95

---



Cyberbond Blast Acccelerator Spray
Rick Carter is very impressed with the usefulness of Cyberbond Blast Accelerator around the taxidermy studio. Like its name suggests, Cyberbond Blast Accelerator will speed the cure time of all superglue products. This can help you to fill gaps, tack materials quickly, and eliminate the need for clamping. It is easy to use. You can use the convenient pump sprayer to pre-apply it to a surface, or post apply it to any super glue product. A quick spray of Blast will immediately cause any super glue (Cyberbond or Zap products) to cure immediately. Rick Carter uses it in the taxidermy studio whenever he wants any cyanoacrylate adhesive to set up instantly, like when he is gluing skins around artificials noses, jaw sets and duck bills. Just spray the Blast and your skin is set!

Code                       Item Description                        Price
CB702     2 oz. Blast Flammable Accelerator (No Air Shipments)      9.95